König Electronic VID-TRANS75KN Manual De Usuario página 7

Receiver:
1) Connect the RCA plugs to the AUDIO/
VIDEO OUT output (1) and the Scart plug
to the input of the TV.
2) Connect the DC plug of the AC/DC adapter
to the 9 V input (2). Connect the AC plug
to a 230 V power outlet.
3) Switch on the receiver with the ON/OFF
switch (3).
4) Select a channel (1,2, 3 or 4) with the
channel button. If a channel shows some
distortion, try another
transmitter and receiver needs to be set to
the same channel.
Note: if the transmitter is switched OFF and
switched ON again the transmitter returns
automatically to channel 1.
For optimum performance, it can be necessary to point the transmitter and receiver to
each other in an imaginary straight line. Or, in case of distortion, replace the transmitter
and/or receiver a bit, a few centimeters could already be enough to improve the sound
and picture quality. Adjustments are not necessary if the reception is perfect.
channel. The
7
TV