Starck Parrot Zikmu Solo Manual Del Usuario página 19

Note : If the Parrot Zikmu Solo has already been connected to a Wi-Fi network, it will
not create its own Wi-Fi network. To do so, you first need to reset the Parrot Zikmu
Solo Wi-Fi parameters by holding down the
1. On your computer, scan for available Wi-Fi networks.
2. Join the "SoloNet-xx.xx" Wi-Fi network (as if you were trying to establish a
connection with a router / modem).
Note : You will temporarily lose your Internet access. You can reconnect your
computer to your Wi-Fi network at the end of this procedure.
3. Launch your web browser on your computer or Smartphone and enter http://
zikmu-solo.local/wifi (or http://[new-name].local/wifi if you changed the
speaker name) in the address bar.
4. Click on Scan
5. Enter the WEP / WPA / WPA2 if necessary then click on Apply.
Using the web interface
The Parrot Zikmu Solo web interface allows you to:
check whether a new update is available
control the playback of your audio files
modify several audio settings.
All manuals and user guides at all-guides.com
and select your Wi-Fi network.
button for 6 seconds.
English 19