SIZZIX Big Shot Manual De Instrucciones

Cutting fabric has never been easier! The Sizzix® Big Shot™
Machine saves time, money and effort with a quick, efficient and
easy cutting process. Create your favorite shapes with ultimate
precision from a wide range of fabrics – everything from silk and
cotton to denim and wool – even several layers at once!
IMPORTANT SAFETY INSTRUCTIONS
WARNING
– When using this product, basic
precautions should always be followed, including the following:
a) Read all the instructions before using the appliance.
b) To reduce the risk of injury, close supervision is necessary
when this machine is used near children.
c) Do not contact moving parts.
d) Only use attachments recommended or sold by the
manufacturer.
e) Do not use outdoors.
f) Always place and operate this machine on a clean, flat
surface.
g) PINCH HAZARD. AVOID ROLLERS.
h) DO NOT OVERLOAD THE MACHINE.
i) CUTTING HAZARD. AVOID CONTACT WITH THE DIE
BLADE.
j) ADULT SUPERVISION OF CHILDREN RECOMMENDED.
SAVE THESE INSTRUCTIONS
Slide the sandwich into the opening of the machine. Note the
rotation of the handle, and continue to rotate it in the same
direction until the sandwich has passed through the opening of
the rollers. Remove the sandwich from the machine.
Your die-cut shape is ready to use!
Tips & Tricks
All the latest Tips & Tricks and folding techniques to
complement the Big Shot Machine are available at
www.sizzix.com/shop/sizzixquilting.
Warranty
This product comes with a limited warranty. Visit
sizzix.com/warranties for details.
Notices
US & Intl Patents (see sizzix.com/legal)
For customer support, please visit sizzix.com
866-742-4447 toll-free in USA
949-598-8821 outside USA
For European customer support, please visit www.sizzix.co.uk
within UK: 0844 499 8181
outside UK: +44 (0) 845 345 2277
Made in China
™
"Sandwich"
LISTED
ÉNUMÉRÉS
LISTADO
091313
Assembly Instructions
Crank Shaft
Before attaching handle, remove protective cap on crank shaft and
discard. Then, attach handle by sliding washer over hex screw and
inserting through handle and into crank shaft. Tighten hex screw
with hex wrench provided in handle kit. Press end plug over hex
screw until firmly sealed.
Using Bigz™ Dies
Cutting Pad
Fabric
Die
Cutting Pad
Place a Bigz die on a Cutting Pad with the foam side up. Place
fabric on top of the die (up to eight layers depending upon the
material). Place a second Cutting Pad on top of the fabric to
create a "sandwich."
Bigz XL and XL 25" dies require extended and extended 25" Cutting Pads
(sold separately).
Washer
Hex Screw
End Plug
Handle
Protective Cap