LUND SR2 Instrucciones De Instalación página 5

Front
(Fig 8) Passenger side front mid 2015-on (example
of models with factory installed threaded inserts)
NOTE: Notch on
Front Bracket
(Fig 10) Attach Bracket to back of pinch weld
(models with factory holes in pinch weld only)
09-17 DODGE RAM 1500 & 10-17 RAM 25-3500 CREW CAB
Passenger Side Installation Pictured
(2) 6mm Screws
(4) 6mm Flat Washers
(2) 6mm Flange Nuts
Front
Page 4 of 6
IMPORTANT: 2009-2012 models without holes in
pinch weld will require drilling 1/4" holes through
pinch weld to attach the bracket. Do complete
installation of Running Boards first, level
Running Board before drilling holes for bracket.
(2) 8mm Hex Bolts
(2) 8mm Lock Washers
(2) 8mm Flat Washers
NOTE: Notch on
Front Bracket
(Fig 9) Passenger side front models with factory
installed threaded inserts. Bolt Plate not required
NOTE: Notch on
Front Bracket
(Fig 11) Attach Bracket to back of pinch weld
(models with factory holes in pinch weld only)
SR2 RUNNING BOARD
Front
(2) 6mm Screws
(4) 6mm Flat Washers
(2) 6mm Flange Nuts
Front
11/27/17 (RA)