Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
H-2890, H-2891
SINGLE-SIDED GRID
BIKE RACK
TOOL NEEDED
9/16" Wrench
Leg x 2
1.
Insert bolt upward through hole in leg and pole.
Fasten loosely with locknut. Repeat by attaching
other leg to pole. (See Inset A)
2. Insert bolt through hole at the top of the leg and
end of grid. (See Inset B)
NOTE: Grid can only be positioned one way
for mounting. The holes on top are drilled
diagonally through the tube at a slight
downward angle.
PAGE 1 OF 3
1-800-295-5510
uline.com
PARTS
Grid Section x 1
ASSEMBLY
Pole x 1
3. Fasten loosely with locknut. Repeat by attaching
other leg to grid.
4. Align bottom holes of grid with middle hole of legs.
Insert bolt upward and fasten loosely with locknut.
Repeat by attaching other leg to grid. (See Inset C)
5. Complete assembly by tightening all bolts.
Inset B
Inset A
Inset C
Para Español, vea página 2.
Pour le français, consulter la page 3.
Locknut x 6
Bolt x 6
0721 IH-2890
Manuales relacionados para Uline H-2890
Resumen de contenidos para Uline H-2890
- Página 1 Para Español, vea página 2. Pour le français, consulter la page 3. H-2890, H-2891 1-800-295-5510 uline.com SINGLE-SIDED GRID BIKE RACK TOOL NEEDED 9/16" Wrench PARTS Leg x 2 Grid Section x 1 Pole x 1 Locknut x 6 Bolt x 6 ASSEMBLY Insert bolt upward through hole in leg and pole.
- Página 2 H-2890, H-2891 800-295-5510 uline.mx RACK PORTABICICLETAS CON REJILLA DE UN LADO HERRAMIENTA NECESARIA Llave de 9/16" PARTES 2 Patas 1 Sección de Rejilla 1 Poste 6 Contratuerca 6 Pernos ENSAMBLE Inserte un perno hacia arriba a través del orificio 3. Fije con una contratuerca sin apretar. Repita fijando de la pata y el poste.
- Página 3 H-2890, H-2891 1-800-295-5510 uline.ca SUPPORT À VÉLOS DE TYPE GRILLE À UN CÔTÉ OUTIL REQUIS Clé de 9/16 po PIÈCES Patte x 2 Section de grille x 1 Poteau x 1 Écrou freiné x 6 Boulon x 6 MONTAGE Insérez un boulon vers le haut à travers le trou dans 3.