Setting Up The Laser Projector - BlissLights Sky Lite 2.0 Manual Del Usuario

SETTING UP THE LASER PROJECTOR

Before operating your laser projector, please read the "Before you Begin" section and
1. Remove protective film sticker from laser aperture.
2. Insert the USB power cord into a powered USB port or use the included wall adapter
to connect to an available electrical outlet. It is best practice for users to connect the
power adapter to the wall before connecting the device to the power adapter.
3. Place the Sky® Lite 2.0 on a flat solid surface and aim toward desired ceiling/wall.
4. Press the power button. The nebula and laser stars will gradually illuminate
and begin moving by default.
5. To adjust the illumination angle for walls, tilt the light forward onto the secondary
support panel.
6. To turn off the light, press and hold the bottom button or cycle through the power
button modes until the unit turns off completely. Remove the power plug from
electrical outlet.
7. Use the following buttons to control lighting effects:
Top button (effects):
• Power on
• Bluetooth® compatible models:
Press and hold until flashing stops to pair
• 7 Default Modes (All, fading, stars only,
cloud only, ocean, space, sunrise)
• User-created app modes
• Power off
Middle button (rotation):
• Rotation off
• Rotation on
Bottom button (brightness):
• High
• Medium
• Low
• Press and hold to power off without
cycling through all effect modes
BLUETOOTH APP PAIRING
Bluetooth compatitble models can be paired with our
BlissLights app (availble for free from the App Store
or Google Play Store). The app allows users to control
device settings from a phone or tablet, and provides
extra features such as custom nebula color modes
and many other features.
"Notice" section of this user's guide.
3
SCAN TO DOWNLOAD APP