Finish.mounting; Specifications - HeathCo JourneyMan Serie Manual De Instrucciones

Finish Mounting
❒
Align the JourneyMan
and the mounting bracket hole. Secure with
M5 x 0.8 x 40 mm mounting screw supplied.
❒
Push the rubber plug firmly into place.
❒
If not installed on a weatherproof box, caulk
between the cover plate and mounting sur-
face with silicone weather sealant.
❒
Adjust the lamp holders by loosening the
thumb screws but do not rotate the lamp hold-
ers more than 180° from the factory setting.
When screwing in the floodlamps, do not
overtighten.
To avoid water damage and
electrical shock, keep lamp
holders aimed below horizontal.
All manuals and user guides at all-guides.com
cover plate, gasket,
®
Rubber Plug

Specifications

Range . . . . . . . . . . . . . 70 feet (21.0 m); 100
Sensing Angle . . . . . . . Up to 270° (Adjustable)
Fixture Load . . . . . . . . Up to 300 W atts Maximum
Sensor Load Capacity . Up to 1000 Watts (8.3
Power Requirements . . 120 VAC, 60 Hz
Operating Modes . . . . . TEST, AUTO, and MAN-
Time Delay . . . . . . . . . 1, 5, 20 minutes
HeathCo LLC reserves the right to discontinue
products and to change specifications at any time
without incurring any obligation to incorporate
new features in products previously sold.
-8-
feet (30.5 m) with Range
Boost. Varies with sur-
rounding temperature.
Tungsten Incandescent
[Up to 150 Watts maxi-
mum each lamp holder.]
amps), Maximum Tung-
sten Incandescent
UAL OVERRIDE
598-1187-02