Instructions Of Use; Maintenance Instructions; Instructions For Ordering Spare Parts - INDUSTRIAS TECHNOFLEX CASTOR 2300 Manual De Instrucciones

1B
OPERATION
1.8

Instructions of Use :

Make sure that there is no water , electricity or gas instalations in the working area.
Avoid hitting the machine on the floor with the cutter, that they would break the tips of hard metal.
Avoid give blows with the cutter to make the previous hole, it is convenient that the cutter enter soft,
for these it is better to support the tip of the rollers having the cutter a little lifted and later introduce it
in a progressive way.
The Wall Cutter machine, should be caught for the two handles and slip the rollers for the wall.
Pay attention when we work very next to the marks of doors and windows, it can have fixer elements
used to unite to the wall, this can produce the break of the cutter.
Before switch on, make sure that the switch is in "OFF" position.
1.9

Maintenance Instructions

Every day after the use, clean perfectly the dust remains deposited in the exterior.
Check every day before to begin the work, the state of the electric cable and the plug.
Once the year, to disassemble the motor to clean the dust remains deposited inside the motor and
change the bearings and the brushes if it was necessary.
This operation should carry out by qualified worker, or send the machine to Technoflex S.A. official
service .
1.10

Instructions for Ordering Spare Parts

Spare parts are on sale thrugh the official services and in the brand distributors in your locality.
When you order spares do not forget to indicate:
- Type of machine
Units ordered, code and description of parts requested , and whenever possible, the series
-
number of the machines
When equipment or spare parts have to be returned to the factory its necessary to contact with
-
Industrias Technoflex S.A. for prior agreement, "AN ABSOLUTE NECESSITY FOR THEIR
RECEPTION".
1B-6
All manuals and user guides at all-guides.com
INGLÉS