Setup - SodaStream TERRA Manual Del Usuario

SET UP
INSTALLING THE CO
CYLINDER
1. Place the SodaStream
®
a flat sturdy surface and remove the back cover.
2. Remove seal and cap from the SodaStream CO
Connect Cylinder.
WARNING! Never insert or replace the CO
Connect Cylinder while a Carbonating Bottle is
installed in the Sparkling Water Maker. This can
cause the Carbonating Bottle to be ejected or burst.
3. Raise cylinder Pink Handle. Insert the CO
Cylinder in the back of the Sparkling Water Maker.
4. Lower cylinder Pink Handle.
5. Reinstall the back cover. Now you are ready to create the
bubbles.
SODASTREAM CO
®
Please note that the
SodaStream Terra is only
® TM
compatible with the C0 Quick
2
Connect Cylinder and is NOT
compatible with the
SodaStream CO Screw
®
2
System Cylinder or other
cylinders.
QUICK CONNECT
2
Terra Sparkling Water Maker on
TM
Quick
2
Quick
2
Quick Connect
2
QUICK CONNECT CYLINDER
2
COMPATIBLE SODASTREAM
CO QUICK CONNECT CYLINDER
2
1
2
3
4
5
NON-COMPATIBLE
®
CO SCREW SYSTEM CYLINDER
2
13