Restore To Default - Remove Previous Pairing & Connection - aqprox APPBT01 Guía De Usuario

All manuals and user guides at all-guides.com
"V+" & "V-" buttons simultaneously and the call will be transferred to mobile phone.
2. Mobile phone to Speakerphone: Press the "MFB" button,and the call will be trans-
ferred
12. Restore to Default - Remove Previous Pairing & Connection
You may want to reset the speakerphone to its original settings and clear the previous
pairing. Please follow these simple steps.
(1) Ensure the speakerphone is under standby mode.
(2) Press and hold the volume increase & decrease buttons simultaneously for 10
seconds until blue & red LEDs flashes alternatively.
Release the Buttons.
(3) Again, press and hold the volume increase & decrease buttons simultaneously
for 2 seconds until speakerphone emits 2 short beeps and LED flashes stop. The
speakerphone will be powered off and back to original setting.
(4) After default the speakerphone, if speakerphone is power on again, the red LED
will flash on every 3 seconds and speakerphone will emit 3 beeps every 1 minute.
The speakerphone will power off within 2 minutes. This is normal. The speakerphone
will be back to normal performance after completion pairing with Bluetooth devices.
23