Skymaster 3610 Manual De Instrucciones página 5

3610_BedienAnltg_D-TR (19 Sp):Layout 1
Safety information
Please read this safety information thoroughly before commissioning the device! Prolonged absence: In the event of
prolonged absence or thunderstorms, remove the mains plug of the device from the wall socket. Also disconnect the antenna
connections to avoid storm damage.
Cleaning: Remove the mains plug before cleaning the
device. Use a dry or damp cloth and make sure that no
moisture penetrates the device!
Repair: Repairs must be performed by qualified experts. In
the event of improper intervention by a third party, the
warranty will be voided and the safety of the device can no
longer be guaranteed! Never open the housing of the device
yourself: Even when disconnected from the mains, there is
an acute risk of death through electric shock. Internal
components can be damaged if touched.
Place of installation: Place the device on a straight and
even surface. To protect the surface from being discoloured
as a result of the natural heat generated by the device, place
the device on a suitable underlay.
SM Electronic GmbH hereby declares that Article No. 3610 complies with the basic requirements and other relevant
regulations of directives 89/336/EWG and 73/23/EWG.
Waste electrical and electronic equipment is classed as recyclable waste and does not belong in domestic refuse!
We therefore request you to actively support the conservation of resources and environmental protection and to
dispose of this device at responsible take back points – if possible.
All manuals and user guides at all-guides.com
09.03.2009 14:22 Uhr
Adequate ventilation: Please don't cover device during
use. Ensure that the device has a clearance of at least
10 cm at the sides and top, and that the heat can be
dissipated upwards unimpeded.
External influences: Never expose the device to moisture
(e.g. condensation or splash water) or direct sunlight. Do
not place the device in the vicinity of heat sources, such as
e.g. heaters or devices that heat up.
Mains voltage: Use the equipment with the voltage
specified on the case only! Do not plug the equipment into
the mains until all connection and installation work has been
completed.
Seite 5
5