Technical Data; Main Safety Warnings For The Tool - Virax VIPER P30+ Manual Original

2. Technical data

Model
Reference
Voltage
Power
Max intensity during a crimping cycle
Force delivered by the machine to guarantee crimping
Crimping capacity:
For PER / PEX tubes:
For Multilayer tubes:
For steel tubes (stainless steel or galvanized):
For copper tubes:
Crimping cycle time:
For dimensions Ø12 - Ø40 mm
For dimensions Ø40 - Ø110 mm
Jaw rotation
Weight (procedure EPTA 01/2003)
Dimensions of the machine without jaw – length / height / width
Dimensions of the case – length / height / width
Protection class (EN 60745-1)
Length of the electric cable
INFORMATION ON NOISE AND VIBRATION (values measured as per EN 60745)
Noise emission
A-weighted sound pressure level L
Uncertainty K
pA
A-weighted sound pressure level L
Uncertainty L
wA
Use hearing protections !
Emission of vibrations *
Global value of vibrations (vector sum over the three axes – as per EN 60745)
Value of vibration emitted A
Uncertainty K
hHD
* vibration determined as per point 6.2.7 of standard EN 60745-1:2006.

3. Main safety warnings for the tool

WARNING:
▪ Read all safety warnings and all instructions. The lack of application of warnings and instructions
may result in electric shock, fire and/or severe injury.
▪ Store all warnings and instructions to be able to refer to them subsequently.
▪ In the warnings, the term « tool » refers to your power tool supplied by mains using the power sup-
ply cable.
pA
wA
hHD
P30+
253630
230 V / 50 Hz
800 W
6 A
Min. 32 kN
Max.35 kN
Ø 12 to Ø 32 mm.
Ø 12 to Ø 110 mm.
Ø 12 to Ø 54 mm.
Ø 12 to Ø 54 mm.
Min 3s; Max 5s
Min 4s; Max 7s
180°
4,5 kg
396 / 243 / 100 mm
467 / 476 / 145 mm
II
5 m
64.84 dB (A)
3 dB (A)
75.84 dB (A)
3 dB (A)
0.82 m/s2
1.5 m/s2
17