Easyteach-Chart; Adjustment Etw - Rechner Sensors EasyMount P3 Instrucciones

EasyTeach philosophy
EasyTeach menu
Antivalent output
Adjustment „Empty"
Adjustment „Full"
Test
The procedures of the EasyTeach menu are different depending on which mode of the output
i
function you are in. There are options for an adjustment "Empty" or an adjustment "Full" with
the Antivalent output function. With the Normally Open / Normally Closed function there are
two "Full" adjustments for the two independent switching points.

EasyTeach-Chart

The EasyTeach charts are used for optical menu navigation. They illustrate the flashing behaviour of the
LED and the switching of the output at the various menu items.
EasyTeach-chart
Antivalent output
EasyTeach chart*: LED LED / Output function
Yellow = A1 Green = A2
Adjustment "Empty"
Initializing "Empty"
Adjustment "Full"
Initializing "Full"
Test
Here you will find the different adjustments:
Output function
Antivalent
Antivalent
2 x Normally open
2 x Normally open
2 x Normally closed Wire
2 x Normally closed Magnet (ETM)
Adjustment Page
Wire (ETW) Page 24
Magnet (ETM) Page 26
Wire (ETW) Page 25
Magnet (ETM) Page 27
(ETW) Page 25
Page 27
EasyTeach menu
2 x N.O. / 2 x N.C.
Adjustment S1
Adjustment S2
Test
EasyTeach-chart
2 x N.O. / 2 x N.C.
EasyTeach chart*: LED LED / Ausgangsfunktion
Gelb = A1
Adjustment S1
Leereinstellung
Initializing S1
Leereinstellung Initialisierung
Adjustment S2
Volleinstellung
Initializing S2
Volleinstellung Initialisierung
Test Test
Grün = A2
23