Special Characteristics; Care And Maintenance - Panacom PA-7250 Manual Del Usuario

All manuals and user guides at all-guides.com
FEATURES
• DIALING MODE
Before the phone is put in service, you can turn the dialing mode
switch to Pulse (P) or Tone (T) position to be set in accordance with
the dialing method used by your local public telephone exchanger:
NOTE:
T(tone):dual-tone multi-frequency dialing(DTMF)
P(pulse):pulse dialing
Default:Tone position.
• VOLUME RINGER SWITCH
You can adjust the VOLUME OF THE RINGER through the switch
on the side of the handset. Switch to 'LO'(low volume), 'HI' (high
volume) position. If you don't want the phone to ring at all, switch to
OFF on the side of the base unit.
• REDIAL function
Pick up the handset and then press REDIAL key to dial out the last
dialed number automatically.
• FLASH function
When there is an engaged tone or a wrong number, you can press
FLASH button to hang up and dial another number.
• WALL MOUNTABLE
Install the wall mounting adaptor according to the indication on the
bottom of the phone base.
Use a 6 mm drill and 27mm screw to hook when wall mounted.

SPECIAL CHARACTERISTICS:

Using service of call waiting
- Press the key FLASH if you listen to a tone of waiting call.
- The first call is put on pause and you can answer the incoming call.
- To get back to the first call, just press FLASH

CARE AND MAINTENANCE

To keep Your Panacom PA-7250 working and looking good, follow
these few simple guidelines:
Pg. 4