Dmx Linking; Dmx Connection; Master/Slave Connection - Chauvet Professional COLORado 2-Quad Zoom VW Tour Guia De Inicio Rapido

EN
AC Power
Power Linking
AC Plug

DMX Linking

DMX Connection

Master/Slave
Connection
All manuals and user guides at all-guides.com
COLORado™ 2-Quad Zoom VW Tour QRG
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 13 COLORado™ 2-Quad Zoom VW Tour products at
120 V, 16 products at 208 V, or 17 products at 230 V. Never exceed this
number. Power linking cords can be purchased separately.
Connection
AC Live
AC Neutral
AC Ground Green/Yellow
The COLORado™ 2-Quad Zoom VW Tour will work with a DMX controller
using a regular DMX serial connection. A DMX Primer is available from
www.chauvetprofessional.com.
The COLORado™ 2-Quad Zoom VW Tour uses a regular DMX data
connection for its DMX personalities: STD.P, STD.Y, STD.W, and UNO. See
the User Manual to connect and configure for DMX operation.
Note: For optimum control of the 16-bit (fine control) dimming channels in
the STD.P, STD.Y, and STD.W personalities, be sure that both dimming
curves in SET > DIM and SET > CURV are set to OFF.
The COLORado™ 2-Quad Zoom VW Tour uses the DMX data connection for
its Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Wire (U.S.) Wire (Europe)
Black Brown
White Blue
Green/Yellow
3
Screw Color
Yellow/Brass
Silver
Green