Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Problem
Outdoor reading is
flashing or showing
dashes
No outdoor
sensor reception
TROUBLE SHOOTING
Flashing of the outdoor reading is generally
an indication of wireless interference.
1.
Bring the sensor and main unit indoors,
side by side and remove batteries from
each.
2.
Make sure the CH 1-2-3 switch on both
units match.
3.
Reload batteries in outdoor sensor.
4.
Reload batteries in main unit.
5.
Let both units sit within a couple feet of
each other for a few minutes to gain a
strong connection before taking sensor
to outdoor area.
1.
Reload the batteries of both outdoor
sensor and main unit. Please refer to the
SENSOR SETUP section.
2.
Relocate the main unit and/or the out-
door sensor. The units must be within
100m(328ft) of each other.
3.
Make sure both units are placed at least
0.9 m (3 ft) away from electronics that may
interfere with the wireless communication
(such as TVs, microwaves, computers,
etc).
4.
Use standard alkaline batteries. Do not
use heavy duty or rechargeable batteries.
NOTE: It may take a few minutes for
main unit and sensor to synchronize after
batteries are reloaded.
Possible Solution
13
Tabla de contenido
Solución de problemas
