BALDR B0367WST2H2R-V1 Manual Del Usuario página 18

Problem
No outdoor
sensor reception
Inaccurate
temperature/
humidity
"HH/LL" display in
indoor and/or
outdoor
temperature
If your BALDR product does not operate properly after trying the
troubleshooting steps, contact the seller on your order page or
shoot an email to: [email protected].
Do not clean any part of the product with benzene, thinner or other
solvent chemicals. When necessary, clean with a soft cloth.
Never immerse the product in water. This will damage the product.
Do not subject the product to extreme force, shock, or fluctuations
in temperature or humidity.
Possible Solution
Make sure both units are placed at least 3
feet (0.9 m) away from electronics that may
interfere with
the wireless communication (such as TVs,
Use standard alkaline batteries . Do not use
heavy duty or rechargeable batteries.
NOTE: It may take a few minutes for main
unit andsensor to synchronizeafter batteries
are reloaded.
Make sure both the main unit and sensor are
placed out of direct sunlight and away from
any heat sources or vents.
If the temperature is higher than the detection
range, HH will display on screen for indication;
if lower than the detection range, LL will
display on screen for indication.
PRECAUTIONS
18