Operational Safety - MetalTech ALU Serie Directivas De Seguridad E Instrucciones De Montaje

2

OPERATIONAL SAFETY

READ BEFORE BEGINNING ASSEMBLY.
FAILURE TO UNDERSTAND AND FOLLOW ALL SAFETY RULES AND ASSEMBLY INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH.
METAL CONDUCTS ELECTRICITY:
Do not use this equipment where contact may be made with power lines or other live electrical circuits.
DO NOT OVERLOAD:
This scaffolding is designed to support a maximum load of 700 lb (318 kg)
Per platform: 250 lb (113.4 kg)
OPERATION AND SAFETY
Do not use this equipment if you are in poor health, taking
medications, drugs, or have been consuming alcohol, all of which may
impair your ability to work safely on this product.
Always use this scaffold in conformity with local or national legislation
which applies.
Inspect before use. Do not use scaffold if damaged
or parts are missing.
Examine thoroughly to make sure unit is properly set up.
A safe working deck must have a minimum
width of 18 inches (45.7 cm).
Always use casters locked to the side frames with the locking pins.
Do not climb unless all casters are in locked position.
Erect to be plumb on firm and level surface.
Always install all platforms. Make sure platforms are well engaged on
the structure rungs.
This scaffold must be used on a firm surface that is free
of pits, debris, holes or obstructions.
Do not use the structure to climb up or down the scaffolding, always
use the platforms.
Never place anything under or attach anything to this scaffold to
ALWAYS INSPECT
BEFORE USE
DO NOT USE
THE STRUCTURE
TO CLIMB UP
OR DOWN THE
SCAFFOLDING.
ACIDS ARE
CORROSIVE.
DO NOT EXPOSE
UNIT TO CORROSIVE
SUBSTANCES
UNIT SHALL ONLY BE
USED ON FIRM AND
LEVEL SURFACES
NEVER PLACE
ANYTHING UNDER OR
ATTACH ANYTHING TO
UNIT
increase height or to adjust to uneven surfaces.
Acids are corrosive and can seriously affect strength.
Do not expose this scaffold to corrosive substances.
Keep scaffold free of debris and unnecessary equipment.
Always keep body centered inside structure of scaffold.
Remove or fasten all tools, material or equipment before moving. Use
extra caution when moving to avoid tipping.
Never try moving this scaffold while standing on it.
Never move a scaffold with a worker within.
Do not use powered devices to propel this scaffold. Use extra caution
near operating machinery.
Do not use if the surface is not firm and level.
Do not use in inclement weather or high winds.
Maintain a firm grip while climbing.
Do not modify the scaffold or any of its components.
Do not use the scaffold as a footbridge.
Do not use this product with a distorted piece of aluminum. Do not try to
fix or untwist a piece of aluminum. Distorted piece of aluminum must be
removed and replaced before using this product.
ALWAYS LOCK
THE ALL CASTERS
BEFORE CLIMBING
DO NOT STAND OR
ATTEMPT TO CLIMB
THE PLATFORMS WHEN
THEY ARE INSTALLED
ON THE UPPER RUNG
OF THE STRUCTURE
ALWAYS KEEP BODY
CENTERED INSIDE
STRUCTURE OF UNIT
NEVER TRY MOVING
THE UNIT WHILE
STANDING ON IT
DO NOT USE
THE UNIT AS
A FOOTBRIDGE
SCAFFOLD
MAXIMUM LOAD
CAPACITY:
LB / KG
700 lb (318 kg)
MAX. 700 lb
250 lb (113.4 kg)
(318 kg)
PER PLATFORM
METAL CONDUCTS
ELECTRICTY
DO NOT USE IN
INCLEMENT WEATHER
OR HIGH WINDS
ERECT ON FIRM
AND LEVEL GROUND
REMOVE OR FASTEN
TOOLS, MATERIAL OR
EQUIPMENT BEFORE
MOVING. NEVER MOVE
A SCAFFOLD WITH
WORKER WITHIN.