Gym Master GM97816 Manual De Instrucciones página 11

Program Instruction
1:A PO manual program including: normal mode, time countdown, distance countdown, calorie
countdown mode
2 6 set programs P1,P2,P3,P4,P5,P6.
3. a program of body fat faction
Start instructions
1 Put the safety key on computer board, open the power supply, all the functions of the window will
show 2 seconds and the buzzer will give off a "beep" sound. Then enter into the normal manual
modes.
2 Press start key, speed window show 5 4 3 2 1,start the motor once when the buzzer
sound five times.
Handle mode
1 How to enter in manual program
A Put through the switch., enter in the normal mode of PO manual program directly.
B: Put off the safety key to stop the motor moving, speed window show E07, buzzer will give off
sound bi-bi-bi(the data of other windows keep unchanged)
C When stop, press the
2 3 set functions of the PO handle functions
A: It shows the normal mode at first and all the parameters are original When starts to enter into the
handle modes.
B: When at the normal manual modes, press the
modes ,the time displays flashing 30:00,press
designed in the range of the time is 8:00-99:00.
C: In the mode of time countdown, press the
The original distance show 1.0 kilometers. press the
the designed range is 1.00-99.00 kilometers.
D: Press mode key could enter into calorie countdown mode, the original show of calorie is 50
therm, press + or - can design the range of calorie:20-9990 term.
:Operation of manual mode
A: press the start/pause key, count down the time 5 seconds, motor start moving, original speed
is 1.0km/h.
B: Press + or - can adjust the speed.
C: press the "Stop" key, the speed will decrease till without moving. Press the "Start/stop" key, the
motor starts moving again.
D: Press the quick speed key, you can get your desired speed soon.
E: Put off the safety key to stop the motor moving, speed window show E07, buzzer will give off
sound bi-bi-bi(the data of other windows keep unchanged)
F: Under the time countdown mode, when the designed time descends to 0, the speed slows down
and stop at last, the buzzer sound 5 times every one second. Press start/pause key, the speed
increase from 1.0km/h to the speed of the window display. The time displays not count down.
G: the distance countdown mode is the same as the above.
H: the calorie countdown mode is the same as the above.
I: The unset data adding .
J: Press the "Power supply" key, the treadmill can be opened and closed.
Owner's Manual
program key can enter into the normal mode of manual modes.
Time set, distance set and calorie set.
+ or
mode key can enter the distance countdown mode
+ or
10
mode key enter into the time countdown
- can set the time count down which can be
- key could design moving distance,
11