Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Time and Alarm clock setting guidance
Month
Date
①. Press "MODE" to access the time setting;
②. Press "SET" to access sequently the hour, minute, year, month, day and
③. The setting selected blinks
Year
④. Press UP / DOWN to adjust the setting.
Alarm On/Off
Alarm 1
Morning/Afternoon
①. Press "MODE" to access the alarm setting
②. Press "SET" to access sequentially the alarm index, alarm on/off, hour,
AM
③. Press UP / DOWN to adjust the setting. There are 5 available alarms.
Hour
Minute
Sleep time
①. Press "MODE" to enter the sleep setting,
②. Press "SET" to enable the sleep timer, the figures of sleep timer will blink
③. Press UP / DOWN to set Sleep time (Seven settings: 15min, 30min, 45min,
SLEEP
Note
1. The system will show the time display if there is no operation within 30 seconds.
2. Sleep setting is the time specified for music to play before the Tick Tock Dock automatically turns to standby mode.
7
English
Time setting
12-hour / 24-hour clock settings
Alarm setting
minute, alarm source, alarm volume
The alarm will last 5 minutes once it is triggered, sleep time is 10 minutes.
The alarm will trigger for three times and work in this order if there's no
operation when the alarm rings: Alarm-Snooze-Alarm-Snooze-Alarm-STBY
Sleep setting
60min, 75min, 90min and sleep timer off).
Power output:
RMS 4.5W×2 (THD+N=10%, f0=1KHz)
Signal to noise ratio:
≥80 dBA
Distortion:
≤ 0.5% (@½ output)
Frequency response:
70Hz-20KHz
Input type:
AUX/FM/iPod
Input sensitivity:
750 mV ± 50mV
Adjustment:
Buttons on top and rear panel of speaker
Speaker unit:
1½ inch (40mm), magnetically shielded, 8ohm
Dimension:
130(W) × 126(H) × 89(D) mm
Net Weight:
Approx. 0.5 kg
Gross Weight:
Approx. 0.6kg
Specifications
8
English
Tabla de contenido
