MATTRESS FIRM 100 I/C-UBL Manual Del Propietário página 6

STEP 2
Take the learn switch out of the hardware box
and place in corner of base. Uncoil the main
power cord and extend out head end of base,
then remove the hardware box from shipping
container.
STEP 3
Install (4) legs into the base frame. Simply screw
each leg into a tapped hole at the corner of the
base frame (FIGURE 1). Push pin in to adjust
leg height (achieve leg height of 6 inches to 10
inches).
FIGURE 1
PUSH PIN IN
TO ADJUST LEG
HEIGHT
(6 INCHES TO
10 INCHES)
STEP 4
Carefully lift the adjustable base frame from the shipping carton,
keeping the unit top-side-down.
READ ALL INSTRUCTIONS BEFORE USING
WARNING WARNING
DUE TO RISK OF INJURY, TWO PEOPLE
ARE REQUIRED TO HANDLE AND MOVE
ADJUSTABLE BASE.
STEP 5
Remove the plastic packaging from the adjustable base frame. Carefully
rotate the base frame over so it is resting on its legs.
6
100 I/C-UBL Adjustable Base Owners Manual 290-0029-d
INSTALLATION
READ ALL INSTRUCTIONS BEFORE USING
POWER CORDS MUST NOT INTERFERE WITH
ANY ADJUSTABLE BASE MECHANISMS.
DO NOT WEAVE CORDS THROUGH BASE
LEGS – SCREW
INTO TAPPED
HOLE AT EACH
CORNER
WARNING WARNING
STRUCTURE.