Tabla de contenido
Idiomas disponibles
Idiomas disponibles
BEFORE
FIRST USE
Clean the griddle surface with a damp cloth to wipe off dusts or any unwanted residue.
NEVER soak the unit in water and NEVER use abrasive cleaners or scouring pads on the
non-stick surface as they might damage the coating.
Apply a light coat of cooking oil to the non-stick surface of the griddle.
Plug the power cord into a 120V AC outlet and set the temperature to MAX for
approximately 3-5 minutes.
NOTE: The initial first use may result in minimal smell and smoke. This is caused by the
unit burning off the protective coating that is applied during manufacturing. It is normal
and harmless.
After the allotted time, turn the thermostat to "OFF" position then unplug the cord.
Detach the cord from the griddle and let the unit cool down.
HOW TO USE YOUR
ELECTRIC GRIDDLE
ASSEMBLE YOUR GRIDDLE
1.
Place the drip pan on the bottom of the base.
2.
Place the cooking surface plate over the drip pan and set it in place onto the base.
CONNECTING THERMOSTAT CONTROL SWITCH
1.
Make sure the thermostat control is set to "OFF" and that it is NOT plugged in.
2.
Insert the extended prong into the receptacle on the side of the griddle until you feel it click
into place.
3.
Plug the cord into a wall outlet and set to desired temperature.
SETTING THE TEMPERATURE
Turn temperature control dial to desired temperature setting or according to the recipe of your
choice. The desired temperature should line up with the indicator light.
CAUTION: Griddle surface is hot during use.
NOTE: The indicator light comes on to indicate the unit is heating. When the selected temperature
is reached, the light will turn off. During cooking the light will blink on and off indicating the
temperature is maintained.
www.maxi-matic.com
All manuals and user guides at all-guides.com
4
Tabla de contenido
