Bodypoint PivotFit SH290 Manual Del Usuario

PivotFit
I N S T A L L A T I O N A N D U S E R ' S I N S T R U C T I O N S
These instructions provide important information for the safe use and maintenance of all Bodypoint
PivotFit™ Shoulder Harnesses. Give these instructions to the user or their caregiver and review them
to ensure that they are understood.
WARNING! Product should be installed and
fitted by a qualified rehab technician.
For installation, this product should be
mounted with:
• Flat-Mount end-fittings
• Cinch-Mount end-fittings
• Cam buckle (suitable for users up to 75kg)
Optional Bodypoint belt mounting hardware may
be used for mounting to wheelchairs and seating
systems.
WARNING! Because of the risk of choking, it is
dangerous to use this product without stabilizing
the pelvis – always use with a properly fitted
pelvic support belt.
USE:
WARNING! This product should only be used
for positioning a person in a wheelchair or work
chair. It is NOT intended for use as a transporta-
tion safety device, as a personal restraint device,
or in any other application where its failure could
result in injury. Misuse of this product is
unauthorized and unsafe.
WARNING! Accidental release of this shoulder
harness can allow the user to fall forward. If the
user's movements or cognitive abilities could lead
to accidental release, a caregiver must be present at
all times during its use. Ensure that all caregivers
know how to unfasten the product. Failure to do so
may delay release in an emergency.
558 First Ave. S., Suite 300 | Seattle, WA 98104 | 206.405.4555 | 800.547.5716 | www.bodypoint.com
© 2019 Bodypoint, Inc. All Rights reserved.
Shoulder Harness
™
A R T N OS. SH2 90 & SH 295
this product may change the way a person sits.
Users must continue to practice regular pressure
relief activities and skin integrity checks, not only
where this product contacts the user, but also in
primary pressure-bearing areas such as the sacrum,
legs, and buttocks. If increased skin redness or
irritation occurs, discontinue use and consult your
physician or seating specialist. Failure to do so may
result in serious injury, such as pressure ulcers.
MAINTENANCE: Check periodically for signs
of wear in the stitching, webbing, and pads. If
significant wear is found, contact your supplier for
qualified repair or replacement by Bodypoint.
Under no circumstance should this product be
altered or repaired by unqualified persons – health
and safety depend on it!
hot, 60°C (140°F). Do not bleach. Tumble dry, low
temperature, or drip dry. Do not iron. (Placing
the product inside a cloth bag during washing
helps prevent scratches to the product and the
machine.)
WARRANTY: This product carries a limited-life-
time warranty against defects in workmanship and
materials arising under normal use by the original
consumer. Contact your supplier or Bodypoint for
warranty claims.
For more information on Bodypoint products,
and a list of distributors outside the USA, go to
www.bodypoint.com
PACKAGE CONTENTS
Package may contain one or more of
the following:
• PivotFit Shoulder Harness
• Multi-directional Top Straps
• Cinch-Mount or Flat-Mount End-Fittings
• Cam Buckles
(Optional – Art No. FS032-2)
WARNING! As with any new seating support,
CLEANING: Machine wash,
MDSS GmbH
Schiffgraben 41
D-30175 Hannover
Germany
en
BPI066-en 2019.1