Owner's Manual
Follow the instructions in this manual. Videos are available online to help your during assembly at RideWeehoo.com
Install the push bar onto the frame, aligning the holes of the
inner and outer tubes. Install and fasten the quick release pin.
Install the safety flag. Loosen the left axle nut, insert flag, then
retighten the axle nut. Install the fender using the hook and
loop strap.
Install the seat onto the frame. Swing the bolts into place then
tighten them using the 5mm hex key. 8Nm is the
Page 4 of 6
Weehoo® THRILL™ Bike Trailer for Kids
RideWeehoo.com
recommended torque. Adjust
the seat forward to backward to
fit your child's leg length.
! Caution !
Never roll the bike trailer in
reverse or you may trap your
child's foot between the seat
and the pedals.
