Master & Dynamic MH40-W Manual Del Usuario página 5

TROUBLESHOOTING
>
Press and hold ( 1 second) ON/OFF button to power ON. Battery level will
be displayed at startup.
To conserve battery power, headphones will power OFF after 10 minutes
of inactivity.
CHARGE
• To charge, plug in the USB-C Connector and connect to a USB-A port.
NOTE: the headphones turn off when charging.
• A solid orange light indicates charging and
a solid green light indicates a full charge
when the USB cable is connected.
USER MANUAL
Charging Fully Charged
PAIRING
The first time you power ON your headphones they will enter pairing
mode. Simply connect through the Bluetooth menu on your device and
select M&D MH40.
To manually activate pairing mode, power headphones OFF, then hold
ON/OFF button for 4 or more seconds.
Pairing to 2 or More Devices
1. Enter pairing mode and connect to device 1.
2. Enter pairing mode again and device 1 will disconnect.
3. Connect to device 2 and turn headphone OFF.
4. Turn headphone ON and headphone will automatically connect to device 1
and 2 simultaneously.
5. Pause one device and play from the other to swap headphone connection.
MH40 Wireless Over-Ear Headphones
5