Operation; Transmitting Usb Audio; Linking With Eos Receivers - Eos Wireless converge Manual Del Utilizador

Operation

Transmitting USB Audio

1. Launch the audio application on your computer.
2. Set Volume level to the Maximum Output Level.
3. Select the play function from within the application.
Note: the Eos Converge Transmitter will transmit any audio played on any system application
including, but not limited to iTunes, Windows Media Player, Real Player, Internet radio stations
like Pandora, Rhapsody & Last FM...
Transmitting External Audio
The Eos system allows you to connect and play audio from an external source like an iPod or
other MP3 player, satellite radio, CD player or other audio device with a headphone jack or
analog audio output. Use the provided headphone cable to connect between the audio source
and the Converge Transmitter.
1. Using the Source Button, select AUX (AUX LED will illuminate).
2. Set Volume level to the Maximum Output Level.
3. Press PLAY on the external audio device.
Linking With Eos Receivers/Speakers
You can link to up to 4 wireless Receivers/Speakers located up to 150 ft. away from the Eos
Converge Transmitter. All Eos wireless Receivers/Speakers are shipped in an "open" position,
meaning that they will automatically link with your Converge Transmitter as soon as they are
turned on.
Wireless Receivers/Speakers can be associated to a specific Converge Transmitter, meaning
that they will only receive signal from the Converge Transmitter that they were linked to. For
instructions on how to associate your wireless Receivers/Speakers to a specific Converge Trans-
mitter see the section titled "Wireless Receivers/Speakers ID Settings".
All manuals and user guides at all-guides.com
11
Converge Transmitter