Uline H-6965 Manual De Instrucciones página 2

3. Insert four 1/4 x 1½" screws (8) through side frame
tube into holes located on underside of seat
cushion. (See Figure 3)
Figure 3
4. Use Allen wrench to fully tighten all screws.
5. Align seat cover with holes on bottom of seat
cushion and secure using four 1/4 x 1¼" screws (7).
(See Figure 4)
Figure 4
PAGE 2 OF 6
ASSEMBLY CONTINUED
8
7
1-800-295-5510
uline.com
6. Flip chair upright and snap covers onto back of side
frames. (See Figure 5)
Figure 5
7. Floor glides can be adjusted to compensate for
uneven floors. (See Figure 6)
Figure 6
0921 IH-6965