Uline H-1383 Manual De Instrucciones página 2

Frame
Hole "B"
for 8" Wheel
Hole "A"
for 10" Wheel
Figure 1
PAGE 2 OF 6
Figure 1a
Wheel
Bracket
Hole
Wheel
"C"
Bracket
ASSEMBLY
1. Assemble stair climber on each side. (See Figure 1)
a. Align hole of stair climber (hole marked "A" for
10" wheels or "B" for 8" wheels) with top hole "C"
in wheel bracket.
b. Insert one 5/6"-18 x 1¼" hex head bolt through
the outside of the wheel bracket and stair
climber. Secure with one 5/16" locknut but DO
NOT tighten.
c. Push stair climber towards hand truck frame until
the open end of the stair climber fits over the
frame. (See Figure 1a)
d. Insert one 1/4"-20 x 1⁄" pan head bolt through
the side of the stair climber and frame. Use a
hammer to pierce 1/4"-20 x 1⁄" pan head bolt
through the frame. Secure with one 1/4" locknut.
e. Tighten all locknuts.
1-800-295-5510
uline.com
0421 IH-1383