Using The Device - Woyo SMARTER EASIER Manual De Instrucciones

Company: WOYO Smart Technology (Shenzhen)Co., LTD
Website: www.woyosmart.com Phone: 0086-755-3295 3918
Language : English
Suitable range of use
This device is designed specifically to be used with dents on flexible steel car bodies. The
diagrams below illustrate the types of dents that can be removed. Dents like the kind caused
by impact from hailstones, which leave smooth, rounded dents, can be removed. (More active
materials may call for different devices, like pull hooks or suction cups. Consult with training
personnel for specifics)
Unsuitable range of use
• Sharp dents
• Body areas that have been damaged and reconstructed
• Crumpled/creased areas or dents along creased metal
• Aluminum bodies

Using the device

1.Connect the "220V Power Cable" to the device's "Power Input Socket", and plug the other end of
the cable into a 220V power socket. Flip the "ON/OFF Switch" to ON, which will turn on a red light.
The "Work Status Display" will also turn on. This is the normal status of the device.
2.Once it turns on, the "Work Status Display" will display the WOYO logo, and will then display a
loading message for about 10 seconds. This screen will display the work status of the device. The
device itself will release an intermittent "beeping" sound. This is the normal status of the device.
(Note: If the device continually displays a loading message, power it down, wait 5 minutes, then
power it on again. If it still displays a loading message, contact one of our distributors! )
3.The "Time/effect Dial" lets you select a run time between 0.5 seconds and 4 seconds, and the
device runs at capacity regardless of the length of time selected. Press the "Work" button once to
set run time.
04
4.The "Time/effect Dial" intensity can be set between 20% and 100%. This is the strength that the
device runs at. Press the "Work" button to activate the device. Let go of it and the device will stop.
5.Connect the "Extension Cable" to the device's Quick Connect head and the Restoration Head's
Quick Connection head, and the device is ready to use.
6. After work is complete, set the "Time/effect Dial" to "OFF", and after 5-10 minutes, set the "ON/
OFF Switch" to "OFF" as well. Give the device time to cool down, and then remove the "220V
Power Cable". Every time you use the device, repeat the steps above for a safe and effective
experience.
Dent repair method
Car body dent diagram
First, according to the size of the dent and the color of the paint, set the work time and intensity
of the Paint Damage-Free Dent Restorer. Typical use would see the "Time/effect Dial" set to 0.5-
1 second(s). Grip the restoration head and press the "Work" button, and begin moving around
the dented area. First trace around "area 1", moving in to "area 4" as you add heat. Wait for
cooldown. Then, begin at "area 2" and move towards "area 4" as you add heat. Wait for cooldown.
Then, begin at "area 3" and move towards "area 4" as you add heat. Wait for cooldown. Finally,
continually add heat in "area 4", then wait for cooldown. The repair process should be complete.
(Some areas might require repeated applications of heat or repetitions of the above processes)
During the repair process, the operator MUST take note not to work in one area for more than
1 second. It is recommended that an operator applies compressed air or a wet rag to work areas
to prevent overheating. During the restoration process, great amounts of heat will be created,
causing the metal of the car to soften. Do not apply downwards pressure while restoring, or the
dent will just become larger. During the restoration process, the operator MUST be mindful of the
surface temperature of the car. If the heat gets too high, it will ignite the paint on the car's surface,
causing greater damage. We suggest the operator first practices on the piston cap of an unused
engine or an abandoned car, this way the operator will learn the functions of the device as well as
the dangers associated with its use. Proper use of equipment is the responsibility of any service
provider!
05