Manual Mode - Wisecomm CW5700 Manual Del Usuario

1. Connect the supplied AC adaptor (DC 8V 250mA) to the DC IN jack of the
receiver and plug it into AC outlet.
2. Connect the supplied A/V cable to the jack. Plug the yellow colored RCA
to the VIDIO IN on the monitor/TV and the white colored RCA to the AUDIO
IN respectively.
3. Turn on the power switch.
4. Press the channel selection button to select the same channel as the camera.
5. Refer to the software in the disc included for USB function.
OPERATION
·MANUAL MODE
Select the same channel with the channel selection button on receiver as the
channel of camera. A green LED's light indicates the channel you selected.
·AUTOMATIC SEQUENCING MODE
Press channel selection button on the receiver after CH 4 indicator is lit. it will
be in the sequencing mode.
·OPERATION WITH TV/MONITOR
1. If your color TV/MONITOR has A/V jacks, connect the supplied A/V
cable to TV's A/V jacks and to the A/V jack on the receiver. Be sure to connect
the white connector of the A/V cable to the AUDIO IN jack and the yellow
connector of the A/V cable to the VIDEO IN jack on the TV or MONITOR.
2. Plug the provided AC adapter (DC 8V 250mA) into the DC jack on the
receiver and the other end into AC outlet. Make sure the POWER switch is in
the OFF position beforehand.
3. Locate and orient the receiver to get optimal performance.
4. Be sure the TV/monitor and the receiver are turned on.