Specifications
Range
Sensing angle
Electrical load - incandescent
Power requirements
Operating modes
Time delay
Replacement bulb
Pre-Installation
PLANNING INSTALLATION
Before installing the light fixture, ensure that all parts are present (see Hardware Included on page 4). If any part is
missing or damaged, do not attempt to assemble, install, or operate this light fixture.
Estimated installation time: 30 minutes
TOOLS REQUIRED
Phillips
screwdriver
Wire strippers/
cutters
Electrical tape
Safety goggles
Up to 70 ft. (21.3 m) - Varies with surrounding temperature
Up to 270°
Up to 500 watt maximum
120 VAC, 60 Hz
Test, Auto, Manual
1, 5, 20 minutes
T3 500W, halogen 120 VAC
Flathead
screwdriver
Circuit tester
Silicone sealant
Drill
3
Please contact 1-866-308-3976 for further assistance.
Pliers
Work gloves
Ladder
3/16" (5 mm)
Drill bit
HOMEDEPOT.com