Idiomas disponibles
Idiomas disponibles
The assembly of elements, once selected all lengths, placed at each end of the central elements of 13mm Ø x 120cm, the holes of each 10mm Ø
tube coincide. Once located and separated by lengths, would be fixed by the screws DIN 912 M3X16 that is detailed below . Note that the screw
head has to be accommodated within the recess of more element diameter.
YES
The fixing of the LOOP element, each element is using a Hose Clamp 8-12mm (P0100022) the 13 to 10mm diameter and 7-11mm (P0100031)
to the 10 to 6mm.
HOSE CLAMP 8-16mm Ø
(P01000022)
13mm Ø
Measures page 2 are expressed in external lenght , ie, measuring from each end of the tube. Once elements are assembled correctly ,
proceed
to put each item on the plate to the boom , which would be the last step assembly . Attach plates to boom as specified below .
Once you have the elements assembled, and the boom, it's time to mount the plates to the boom and then the elements to the plate.
What we advise is to start with the plates to the boom, if you rise up the antenna in one piece. If what you want is to raise the elements
once the boom is placed on the mast, we recommend putting the elements to the plates for their best way of the "plate / element" assembly to the
boom.
To add the elements to the plate would have to focus with the help of a tape measure, each element of Ø 13mm, mark in the half with a edding,
and a once centered fix to the plate with the green plastic blocks (EAHYP013) with screws DIN 912 M6X40, as shown in the drawing below .
To place each plate to the boom, are fixed by screws DIN 912 M6X20 and DIN 9021 M6 washer. This plate must be very firm for positioning the
element. The next step would be like the other elements, but considering that the screws use are DIN 912 M6X40 and DIN 985 M6 self-locking
nuts once it is all assembled antenna.
DIN 912 M3X16
13mm Ø
DIN 125 M3
DIN 985 M3
10mm Ø
DRIVEN ELEMENT
DIN 912 M3X16
10mm Ø
DIN 125 M3
DIN 985 M3
NO
HOSE CLAMP 7-11mm Ø
(P01000031)
10mm Ø
6m Plates
DIN 912 6x40mm
DIN 985 M6
ENGLISH
6mm Ø
DIN 912 6x20mm
DIN 9021 M6
