Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Important Information
FOLLOW THESE INSTRUCTIONS
ENG
CAREFULLY AND KEEP THEM FOR
FUTURE REFERENCE
Extension Placement Guides
Extensions must be added as shown.
Extension Placement Guide for Center Gateway (Model G15):
29
{
Included with gate
34
37
{
One optional
39
extension kit
42
{
Two optional
extension kits
45
Each end may have no more than 3 extensions.
Extension Placement Guide for Wood Center Gateway (Model G35):
28"-33
{
Included with gate
33
35
{
One optional
38
extension kit
41
Two optional
{
extension kits
43
Each end may have no more than 3 extensions.
Extension Placement Guide for Gateway (Model G11):
{
30"-36"
Included with gate
35"-38"
One optional
{
extension kit
37
No more than 3 extensions per gate.
Installation
1.
Housings, bars and square extension tubes
(5
") from Basic Center Gateway Set may be
1/8
needed.
Depending on how many extensions are being
added, insert appropriate square extension
tubes (s or t) into gate ends. Connect the bar (k)
to one upper extension housing (h) and one
lower extension housing (i).
2
"-34
"
Gate + 1 extension
1/4
7/8
"-37
"
Gate + 2 extensions
1/2
1/2
"-40
"
Gate + 3 extensions
1/4
1/4
"-42
"
Gate + 4 extensions
7/8
3/4
"-45
"
Gate + 5 extensions
5/8
5/8
"-48
"
Gate + 6 extensions
1/2
1/8
"
Gate + 1 extension
1/2
"-36"
Gate + 2 extensions
1/8
"-38
"
Gate + 3 extensions
3/4
3/4
"-41
"
Gate + 4 extensions
5/8
1/2
"-44"
Gate + 5 extensions
1/4
"-47"
Gate + 6 extensions
3/4
Gate + 1 extension
Gate + 2 extensions
"-41
"
Gate + 3 extensions
1/2
1/2
- may be placed on either end
- one on each end
- 2 on one end, 1 on other end
- 3 on one end, 1 on other end
- 3 on one end, 2 on other end
- 3 on each end
- may be placed on either end
- one on each end
- 2 on one end, 1 on other end
- 3 on one end, 1 on other end
- 3 on one end, 2 on other end
- 3 on each end
Must be placed on
opposite side of
handle end
Push assembly over extension tubes. There
should be no metal showing from extension
tubes. It may be necessary to apply pressure to
tubes to ensure they are fully inserted into gate
ends. Slide spindles into extension tubes.
See applicable Gateway® series user guide to
complete installation.
Tabla de contenido
