Zycoo SL50 Guía De Instalación Rápida página 6

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
English
Installation
1. Use an 8mm drill to drill 4 holes on the mounting wall as per the dimensions shown in Figure 1. The size of plastic anchor is
ø8*40mm.
2. Insert a plastic anchor into each of the mounting holes and use a rubber hammer to tighten the installation of the anchors.
3.Install the mounting bracket to the mounting holes using the M5*45 screws, as shown in Figure 2.
65mm
wall
wall
Figure 2
Figure 1
4.Unscrew the M6 screws of the SL50 speaker, install it on the mounting bracket by tightening the screws.
04
Tabla de contenido
loading

Productos relacionados para Zycoo SL50

Tabla de contenido