Quick Setup - Paradigm AERA Manual Del Usuario

QUICK SETUP

Connecting Your AERA to the same Wi-Fi Network as Your iPhone,
iPad, or iPod Touch
After the power cord is inserted it will take approximately 35 seconds
for your AERA to boot up. During boot-up the LED indicator on the back
of your AERA will begin quickly blinking green (see below).
Before you begin, make sure your AERA is powered on and has
successfully booted-up (the Green status indicator should blink slowly).
Make sure your Wi-Fi router is powered on and functioning.
The Quick Setup method will allow your AERA to connect to the same
network as your iPhone, iPad, or iPod Touch.
WPS
To use the Quick Setup method, connect your iPhone, iPad or iPod
Touch via the USB connection onthe rear of your AERA or via the 30-pin
connector on top of your AERA.
DC Power Input
6
All manuals and user guides at all-guides.com
Quick Setup
1. Plug in iPhone/iPad/iPod Touch via methods pictured above
2. Press and hold for 5 seconds. The STATUS indicator will blink green.
Problems?
If the STATUS indicator continues to blink green, connection has failed.
Wait at least two minutes then try connecting again. If the problem
persists, use the Automatic or Manual Connection methods that follow.
or
or
Your iPhone/iPad/iPod Touch will ask if you would like to share the
Wi-Fi settings with your AERA, tap ALLOW. The STATUS indicator will
turn solid green. AERA is now connected to your network.
or
or