1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Accesorios de Automóviles
  5. 99-6550B
  6. Instrucciones de instalación

Metra 99-6550B Instrucciones De Instalación

Ocultar thumbs
1
2
3
4
5
6
7
8
Idiomas disponibles

Idiomas disponibles

Tabla de contenido

KIT COMPONENTS
• A) Radio housing trim panel • B) Radio brackets • C) Pocket • D) (7) Panel clips • E) (8) #6 x 3/8" Phillips screws • F) (4) #8 x 3/8" Phillips screws
A
B
Metra. The World's Best Kits.
®
Chrysler 300 2005-2007
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted matte black
C
E
G
MetraOnline.com
F
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
99-6550B
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly . .................................................2
Kit Assembly
–ISO DIN radio provision with pocket . .................3
–ISO DDIN radio provision . ....................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: XSVI-6502-NAV • CHTO-01
Antenna Adapter: 40-CR10
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 9/32", 5/32" Socket wrench
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 10/11/18 INST99-6550B
Tabla de contenido
loading

Manuales relacionados para Metra 99-6550B

Resumen de contenidos para Metra 99-6550B

  • Página 1 When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 10/11/18 INST99-6550B...

  • Página 2: Dash Disassembly

    DASH DISASSEMBLY 1. Unclip and remove entire panel surrounding radio and climate controls, including A/C vents and clock. (Figure A) 2. Remove (4) 9/32” screws securing the radio. Slide the radio out, then unplug and remove the radio. (Figure B) 3. Remove the factory vents, clock, switch plate, and climate controls from the factory radio panel, then transfer to the radio housing trim panel using the factory screws or the (8) #6 x 3/8” Phillips screws provided. Continue to Kit Assembly (Figure A) (Figure B) 1.800.221.0932 MetraOnline.com...

  • Página 3: Kit Assembly

    4. Locate the factory wiring harness and using the factory screws. antenna connector in the dash and 4. Attach the (7) panel clips provided to the complete all necessary connections to the radio housing trim panel, then reassemble radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. the dash in reverse order of disassembly Test the radio for proper operation. using the 99-6550B radio housing trim panel to complete the installation. 5. Secure the radio assembly to the dash using the factory screws. 6. Attach the (7) panel clips provided to the radio housing trim panel, then reassemble the dash in reverse order of disassembly (Figure B) using the 99-6550B radio housing trim panel to complete the installation.
  • Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 10/11/18 INST99-6550B...
  • Página 5 Al probar el equipo de posventa, asegúrese de que todo el equipo de fábrica esté conectado antes de completar el ciclo de clave para el encendido. The World’s best kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 10/11/18 INST99-6550B...

  • Página 6: Desmontaje Del Tablero

    DESMONTAJE DEL TABLERO 1. Desenganche y retire todo el panel que rodea el radio y los controles del clima, incluyendo las rejillas del aire acondicionado y el reloj. (Figura A) 2. Retire los (4) tornillos de 9/32” que sujetan el radio. Deslice la radio hacia afuera, luego desenchúfela y quitar la radio.

  • Página 7: Ensamble Del Kit

    3. Deslice la radio en el conjunto de soporte/ al radio. Metra recomienda el uso de un cavidad, luego fíjela al conjunto con los adaptador adecuado de acoplamiento tornillos suministrados con la radio.
  • Página 8 800-354-6782 for more information and take steps www.installerinstitute.com o llame al toward a better tomorrow. 800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda MECP Técnicos certificados The World’s best kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 10/11/18 INST99-6550B...

Tabla de contenido