Idiomas disponibles
Idiomas disponibles
Tabla de contenido
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (8) #8 x 3/8" pan-head Phillips screws
A
B
Metra. The World's Best Kits.
®
Kia Optima (w/o NAV)
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted matte black to match the factory finish
C
MetraOnline.com
2014-2015
D
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
99-7359B
I N S TA L L AT I O N I N S T R U C T I O N S
U.S. Patent # D757,708
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-7304 • AX-HYKIA1-SWC
& AX-HYKIA-SPDIF (for amplified models)
Antenna Adapter: Not required
Steering wheel control interface: ASWC-1
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 5/14/18 INST99-7359B
Tabla de contenido
Manuales relacionados para Metra 99-7359B
Resumen de contenidos para Metra 99-7359B
- Página 1 Also, do not remove the factory radio with the key in the on position, or while the vehicle is running. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/14/18 INST99-7359B...
-
Página 2: Dash Disassembly
DASH DISASSEMBLY 1. Unsnap and remove trim from around 5. Remove (4) screws from instrument top center to passenger side dash. cluster and remove. (Figure E) (Figure A) 6. Remove (4) screws from the climate 2. Unsnap panel from outside edge of controls and remove. -
Página 3: Kit Assembly
5. Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio for proper operation. 6. Secure the radio assembly to the dash using the factory screws. - Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/14/18 INST99-7359B...
- Página 5 Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/14/18 INST99-7359B...
-
Página 6: Desmontaje Del Tablero
DESMONTAJE DEL TABLERO 1. Desenganche y quite la moldura de 5. Quite los (4) tornillos del conjunto de alrededor de la parte de arriba del centro instrumentos y quítelo. (Figura E) al tablero del lado del pasajero. (Figura A) 6. Quite los (4) tornillos de los controles del 2. -
Página 7: Ensamble Del Kit
Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. Pruebe el radio para verificar que funcione correctamente. 6. Asegure el ensamble de la radio al tablero usando los tornillos de fábrica. - Página 8 800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP). Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/14/18 INST99-7359B...