Care And Maintenance; Technical Specifications - Brigmton BBS-200 Manual De Instrucciones

Care and maintenance

Camera performances can be adversely affected by fingerprints or dirt
on the lens surface, avoid touching the lens surface with your fingers.
Should the lens become dirty, use a blower to blow off dirt and dust, or
a soft, dry cloth to wipe off the lens.
Keep dry, precipitation, humidity, and liquids, contain minerals that will
corrode electronic circuits.
Do not use or store in dusty, dirty areas. Moving part may be
damaged.
Do not store in hot areas. High temperatures can shorten the life of
electronic devices and warp of melt certain plastics.
Do not store in very cold areas. When the wireless camera system
warm up (to its normal temperature), moisture can form inside the case,
which may damage electronic circuit boards.
Do not attempt to open the case. Non-expert handling of the device
may damage it.
Do not drop, knock, or shake it. Rough handling can break internal
circuit boards.
Do not use harsh chemicals, cleaning solvents, or strong detergents
when cleaning. Wipe with a soft cloth slightly dampened in a mild
soap-and-water solution.
If the wireless camera system is not working properly, take it to your
nearest qualified service facility, the personnel there will assist you,
and if necessary, arrange for service.
Operate this product using only the power supply included with it or
provided as an accessory.
Do not overload electrical outlets or extension cords as this can result
in fire or electric shock.
-9-

Technical specifications

Camera transmitter
1. 1/3" CMOS color image sensor (PAL or NTSC)
2. Transmit Frequency: 2.400-2.480GHz (3 channels)
3. Output power (max.): 0dBm (FCC); 10dBm (CE)
4. Operational range: up to 100 meters (open air situation)
5. Modulation: FM
6. Channel design: PLL frequency synthesizes
7. AV input port: 3.5mm stereo jack
8. Antenna: built-in omni-directional antenna
9. Power consumption (max.): 1.8 Watts
10. Power supply (optional): 230VAC to 7.5VDC, 300mA
or 120VAC to 7.5VDC, 300mA
or 2AA Battery
11. Dimension:86mm×87mm×89mm
Receiver
1. Receiver Frequency: 2.400-2.480GHz (3 channels)
2. Receiver sensitivity: -80dBm
3. Channel design: PLL frequency synthesizes
4. AV output port: 3.5mm stereo jack
5. Antenna: built-in omni-directional antenna
6. Power consumption (max.): 2 Watts
7. Power supply (optional): 230VAC to 9VDC, 400mA
or 120VAC to 9VDC, 400mA
or 3AA Battery
8. Dimension: 75mm×53mm×148mm
-10-