Pairing; Use; Other Settings - SOMFY io filaire Instrucciones

PAIRING

When the thermostat is powered on, it remains in pairing mode for 10 minutes. Go to your
TaHoma interface to pair your thermostat with your home automation box.
If you do not complete pairing within this period, use a pointed object to
press on the PROG button on the back of the thermostat's front panel
for 3 seconds. Make sure that the power supply module remains in place
when removing the front panel from the thermostat.

USE

ON THE THERMOSTAT:
You can set the temperature of your thermostat manually to between 15 and 26 degrees,
thanks to the product's touchscreen interface. This will have the effect of creating an
exemption, which will end when a new setpoint is issued by TaHoma (temperature, mode,
weekly program or scenario).
TAHOMA:
• Simple control: You can modify the temperature on your control interface, and select the
desired mode from night, at home, out, and frost protection modes.
• Schedule: The thermostat can be integrated into the TaHoma's schedule. You will then
be able to include temperature or mode orders in your typical days. NB: if you want to use
the TaHoma's schedule, you need to deactivate the internal program to prevent schedule
conflicts.

OTHER SETTINGS:

• Heating anticipation (deactivated by default): If heating anticipation is activated, your
thermostat will automatically calculate the time required to reach the desired temperature at the
requested time.
• Min. / Max. (by default 5°C - 26°C): Used to set limit temperatures on your io thermostat.
• Thermostat Child locking mode (deactivated by default): Child safety function, locking
temperature changes on the io thermostat.
• Window open detection (activated by default): If the temperature falls more than 2°C in
less than 20 minutes, then the current mode shuts down, to switch to window open mode
= temperature setpoint 8°C. The io thermostat will restart after 20 minutes, or if it detects a
temperature increase of 0.5°C in less than 20 minutes.
• Continuous display (deactivated by default): You can activate or deactivate the continuous LED
display on your thermostat.
• Hysteresis (0°C by default): You can set your thermostat's sensitivity threshold for more or less
fine heating regulation. The thermostat deems that the temperature setpoint reached when the
sensitivity threshold is reached (e.g.: Tsetpoint = 20°C, Hysteresis = +/-0.2°C, then regulation range
= 19.8°C - 20.2°C).
21