Idiomas disponibles
Idiomas disponibles
Trailer Mirror installation for trucks
with Premium level trim and non-
powerfolding OE Mirrors (DL8)
Kit Contents
Description
1 Driver's Side Trailering
Mirror Assembly (Driver's side shown)
2 Passenger Side Trailering
Mirror Assembly (Not shown)
Required Tools
Flat bladed tools
-Screwdriver
-Panel Trim Removal Tool: Plastic, Vinyl or Nylon Knife
Ratchet with 10 mm deep well socket and 6 inch extension
Pliers
Pencil Magnet
Torque Wrench
Upper Extension Trim Panel Replacement (Except Escalade)
1. Open the front door to remove the upper extension trim
panel.
2. Remove the upper extension (1) from the trim panel by
pulling outward on the front edge in order to release the
three clips (2). When re-installing, align the upper retainer
clips to the door frame. Then, press inward on the upper
extension until the clips fully engage securing the panel to
the door.
Trailer Mirrors
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
Quantity
1
1
REVISION
AUTH
1
Upper Extension Trim Panel Replacement (Escalade)
3. Open the front door to remove the upper extension trim
panel.
4. Remove the upper extension (1) from the trim panel by
pulling away the top edge to release the clip (2). When re-
installing, align the tab (3) first. Then, press inward on the
upper extension until the clip is fully engaged.
PART NO.
REV 16AU07
INSTALLATION INSTRUCTIONS
DR
TITLE
PART NO.
19201573
6200 Grand Pointe Dr., Grand Blanc, MI 48439
19201573
SHEET
Trailer Mirrors
4
SHEET
4
18
OF
18
OF
