User Instructions - EASYHOME HC-T51M Manual Del Usuario

Oscillating Ceramic Tower Heater

USER INSTRUCTIONS

CAUTION: ALWAYS USE CAUTION WHEN HANDLING THE TOWER
HEATER. DO NOT DROP THE TOWER HEATER.
VENTILATION GRILL!
1. The Tower Heater must be placed on a firm, level surface.
2. Plug the power supply cord into an electrical outlet. Be sure plug fits tightly in
outlet. A loose fit will cause overheating and damage the plug. Plug and cord
set may feel warm during normal usage. Once plugged in, the power indicator
light will illuminate.
3. When turned on, the indicator light will illuminate red. The red indicator light
will remain lit until the control knob is turned off and the heater is unplugged
from the electrical outlet.
4. NOTE: Avoid overloading your circuit by not using other high wattage
appliances in the same outlet.
Control Knob
5. Rotate the control knob to the desired function.
OFF
Off
6. Turning the Oscillating Switch to the "ON" position will allow the TOWER
Heater to oscillate left and right. To stop the oscillation, turn the oscillating
switch to the "0FF" position.
7. To turn the Tower Heater OFF, rotate the control knob to "OFF" position, then
remove the plug from the wall outlet.
Safety Protection System
This Tower Heater has protection safeguards that shut off the Tower Heater when
components become excessively hot.
8
888-367-7373
Fan Low heat mode
_USER INSTRUCTIONS
DO NOT COVER THE
Oscillating Switch
LO
High heat mode
AFTER SALES SUPPORT
[email protected]
HI