Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6. Install bumper brackets - Place bumper bracket into position, install 2 long M14 fasteners that were removed earlier through the bumper bracket and
truck frame, install the 5/8"conical tooth washer (item 6) teeth side toward hitch and M14 nut (item 7). Install the 1/2'' hex bolt (item 8) and 1/2'' conical tooth
washer (item 5) teeth side toward hitch, through the bumper bracket and hitch side bracket, install 1/2'' conical washer (item5) teeth side toward hitch and
1/2'' hex nut (item 9) onto hex bolt. Repeat for each side.
7. Install bumper – Place bumper into position, aligning studs in bumper with holes in hitch bumper bracket. Install 7/16" conical tooth washer (item 11)
teeth side toward bumper bracket and M10 hex nut (item 12) onto bumper studs. Repeat for each side. Install M10 bolts (item 10) with 7/16'' conical tooth
washer (item 11) teeth side towards bumper through holes in bumper in license plate area . Install 7/16'' conical washer (item 11) teeth side towards hitch
and M10 hex nut (item 12) onto the M10 bolts.
©2018 Horizon Global Americas Inc. - Printed in Mexico
Adjust bumper position as necessary for proper alignment.
Sheet 8 of 27
41913NP
06-15-18
Rev. A
Tabla de contenido
