Safety Instructions - sigel. MU010 Manual Del Usuario

GB

Safety instructions:

Pinboard (MU010/MU011)/Whiteboard (MU020)
▪ Use and store the boards in the stand or wall track only, as otherwise they can tip over, causing injury
or material damage.
▪ Follow your company's safety guidelines when carrying the board.
▪ Always carry the board with care to avoid injuring others or causing material damage.
Stand (MU050)
▪ Do not use the stand as a seat or step ladder: if the stand rolls away it can cause injury.
▪ When storing the stands, do not stack more than three on top of each other, as they could tip over,
causing injury or material damage.
▪ Lock the casters when the stand is in use and when inserting or removing a board by pushing down
the locking lever on each caster.
▪ Only push the stand over hard, even floors, to allow the casters to roll smoothly.
▪ Lift the stand by the short edges of the top side. Do NOT put your hand into the central slot to lift the
stand, as this can lead to injury.
▪ Follow your company's safety guidelines when carrying the stand.
▪ Always carry the stand with care to avoid injuring others or causing material damage.
Wall track (MU060)
▪ Affix the wall track to the wall as described in the mounting instructions.
▪ Place the board horizontally in the wall track and lock it into place by sliding the two safety wedges
onto the left and right of the board frame. The board must not be placed vertically in the wall track,
as it could fall out, causing injury or material damage.
▪ Two people are needed to insert or remove the board to avoid injury or material damage.
▪ When placing two boards next to each other, remove the end caps and use the enclosed connecting
piece to make a continuous track. This minimizes the risk of injury caused by unprotected track ends.
4