Idiomas disponibles

Idiomas disponibles

Quick Start Guide
Connect
www.ablenetinc.com
(800) 322-0956
Compatibility
To control the entire iPad and most apps with Connect and
one or two switches, you will need the following:
iPad Air, iPad Air 2, iPad 4th Gen, iPad 3rd Gen,
or iPad 2
iOS 7 with Switch Control enabled
One or two switches
To control apps that have switch access built into the app with
Connect and one or two switches, you will need the following:
iPad Air, iPad Air 2, iPad 4th Gen, iPad 3rd Gen, iPad 2,
or iPad
iOS 5 or higher
Switch accessible app(s)
One or two switches
Note: Because of the smaller size, the iPad Air and iPad Air 2
requires an adapter kit for use with Connect. Contact AbleNet
for an iPad Air Connect Adapter Kit.
All manuals and user guides at all-guides.com
Switch
Jack 2
iPad Sync &
Charging Jack
PN 98000005 (03/14 Rev. A)
Warranty
AbleNet manufactured products include a two-year limited
warranty. This warranty is against defects in materials and
manufacturing for two-years from the date of purchase.
Warranty in full text, along with return/repair information is
available at www.ablenetinc.com.
AbleNet does not cover damage caused to an iPad,
iPhone, iPod, or other consumer electronic devices used in
conjunction with any product manufactured by or distributed
by AbleNet.
For more information on AbleNet products and services,
contact:
AbleNet, Inc.
800-322-0956
www.ablenetinc.com
Capacitive Touch
Switch 2
Amplified
Connect Removable Faceplate
Speaker
Status Light
Capacitive Touch
Volume
Power
Controls
Headphone Jack
Legal
©2014 AbleNet, Inc. All Rights Reserved. Connect is a
trademark of AbleNet, Inc.
iPad and iPad Air are a trademarks of Apple, Inc., registered
in the U.S. and other countries. iOS is a trademark or
registered trademark of Cisco in the U.S. and other countries
and is used under license.
FCC
Contains FCC ID: 2AAUWHRF24A13AN
And FCC ID: S78-IVTI50E
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Switch 1
Amplified
Speaker
Switch
Jack 1
Connect
Charging Jack
iPad not included.
Tabla de contenido
loading

Resumen de contenidos para AbleNet Connect

  • Página 10: Compatibilidad

    Para controlar las aplicaciones que tienen acceso al y en otros países y es utilizada bajo licencia. interruptor incorporado en la aplicación con Connect y uno o AbleNet no cubre los daños causados a un iPad, iPhone, iPod dos interruptores, necesitará lo siguiente: u otros dispositivos electrónicos de consumo utilizados junto...
  • Página 11: Paso 1: Cargue Connect

    3. Reemplace la inserción de espuma en el Connect y deje colgando los conectores de 30 pines o de iluminación del cable USB. Ver Diagrama 3. 4. Inserte el Juego del Adaptador Connect de iPad Air si está utilizando un iPad Air con Connect. Ver Diagrama 4. 5. Encienda el iPad.
  • Página 12 Luz roja intermitente aparece cinco veces cada 5 segundos: la Si va a utilizar los botones de Volumen + y Volumen - Carga del iPad: Para cargar su iPad sin sacarlo de Connect, utilice el batería de Connect está baja y debe cargarse inmediatamente de Connect para controlar la salida de volumen, ajuste USB para cable USB junto con el cargador que viene con el iPad.

Tabla de contenido