Initial Start-Up; Cleaning And Maintenance - Termozeta Spremo Piu'1100 Libro De Instrucciones

INITIAL START-UP

• Rest the appliance on a horizontal and stable surface away from heat sources.
• Assemble the appliance by following the procedure indicated in fig. 1.
• Select the type of cone in relation to the size of the citrus fruit and the pulp quantity
depending on your preference (refer to the section on "Accessories and sliding knob
for filter adjustment").
• Completely unwind the power cord and connect the plug to a power outlet.
• Cut the citrus fruit in two sections and press each half lightly on the juicing cone. The
juicer starts operating automatically and the cone starts to turn. Simply remove the
pressure from the cone to stop the juicer. Tips and suggestions To get as much juice
as possible from the fruit, press the citrus fruit onto the cone several times instead of
keeping it continually pressed.
Attention!
• Too much pressure on the cone may cause the motor to block.
• Do not let the juicer operate for more than two minutes consecutively.
• Wait five minutes between each use to allow the motor to cool.
• Do not let the power cord hang from the bench top.
• Do not insert sharp cutlery or objects while the cone is moving.
• After use, disconnect the plug from the power outlet.

CLEANING AND MAINTENANCE

• Before carrying out any operation, always disconnect the plug from the power
outlet.
• Disassemble the juicer and wash all the parts – expect for the motor base (6)
– with water and dishwashing detergent. The motor base should only be cleaned with
a slightly damp cloth.
• Never wash the parts in a dishwasher.
• Do not immerse the body of the appliance in water or other liquids.
• Never use chemical or abrasive substances.
INFORMATION FOR USERS. In accordance with European Directives 2002/95/CE,
2002/96/CE and 2003/108/CE on the restriction of the use of dangerous substances
in electric and electronic equipment as well as their waste disposal. The barred symbol
of the rubbish bin shown on the equipment indicates that, at the end of its useful life,
the product must be collected separately from other waste. Therefore, any products
that have reached the end of their useful life must be given to waste disposal centres
specialising in separate collection of waste electrical and electronic equipment, or given back to the
retailer at the time of purchasing new similar
equipment, on a one for one basis. The adequate separate collection for the subsequent start-up
of the equipment sent to be recycled, treated and disposal of in an environmentally compatible way
contributes to preventing possible negative effects on the environment and health and optimises the
recycling and reuse of components making up the apparatus. Abusive disposal of the product by the
user involves application of the administrative sanctions according to the laws in force.
Termozeta Spa. reserves the right to make aesthetical and/or technical changes without notice
finalised at product improvement.
TERMOZETA is an international trademark. Copyright © 1995. All rights reserved.
Termozeta SpA
Via Magenta 41/43 - 20010 Bareggio (MI) - ITALY