Kasanova LKP000004NOC Manual De Instrucciones página 15

MULTIPURPOSE FOOD PROCESSOR
15
Risk of injury from the rotating tools!
While the appliance is operating, keep fingers clear of the mixing bowl.
Do not change tools until the appliance is at a standstill and have been unplugged. When switch
off, the drive continues running briefly.
HOW TO USE KNEADING HOOK ,FLAT BEATER ,WHISK
1. Place the appliance on a flat surface, e.g. a kitchen counter, and make sure it is standing firmly.
Place the blender protective cover (3)into the swivel arm (1).(see illustration)
2. Turn the arm release button (4) clockwise. at the same time lift the swivel arm with hand so that
it locks into place with a click, The swivel arm tilts up.
3. Fit the bowl lid (26) onto the lid bracket(9) and turn it slightly clockwise, so that it locks into
position securely.
4. Place the food in the mixing bowl(29).
Fit the mixing bowl in the recess on the motor house(7).
Turn the mixing bowl slightly clockwise, so it locks into position.
5. Put the splashguard (27) onto the kneading hook (31) as shown in the picture. Turn and fix the
hook. The splashguard can prevent the dough from climbing to the top of the hook.
Fit the required accessory (31 or 28 or 32) onto the motor spindle (10) on the underside of the
swivel arm.
A. The kneading hook is used for heavy dough, minced meat or other demanding kneading jobs.
B. The flat beater (32) is used to mix lighter types of dough.
C. The whisk (28) is used for whisking cream, egg whites, etc.
Turn the accessory, so the pins on the spindle are aligned with the depressions on the accessory
top edge. Press the accessory against the swivel arm and turn it anti-clockwise at the same time
until the pins engage and the accessory locks into position securely. The accessory must not be
loose nor should you be able to pull it free.