Simac VAS80 Manual Del Usuario página 3

All manuals and user guides at all-guides.com
This guide does not intend to explain conpletely the use of the
Please read carefully the instructions for use for any doubt
ASSEMBLY AND PREPARATIONS FOR USE
Before performing maintenance or cleaning the appliance, make sure it is
unplugged from the mains.
1
Remove the condensate tank using the slide on the handle.
2 To open the boiler, unscrew the cap
Fill the tank with a maximum quantity of about 1.5 litres of tap water (without adding
detergent).
Screw the cap up completely.
1
PREPARING THE CLEANING TOOLS
Fit the hose onto the appliance.
Insert the bayonet coupling into the socket on the cover, press down and rotate clock-
3
wise until it stops.
Open the safety hatch and insert the plug into the socket on the bottom of the applian-
ce, making sure that the arrow points upwards. Push down until it locks into place.
To remove, press the locking fins at the side and pull.
4
Insert the extension tube onto the hose handgrip, making sure the handgrip coupling is
perfectly connected to the extension tube coupling by pushing firmly together.
5
Lock in place by rotating the locking ring.
To insert the second extension tube or brush, proceed as described above.
BAYONET
COUPLING
PLUG
3
appliance.
regarding the appliance.
2
4 5