Bestron AJA902S Manual Del Usuario página 25

• Insert the radiator (control panel with heating element) properly into the housing. If the radiator is not
correctly positioned, the safety lock (A) prevents the device from being started up.
OPERATION - Before use for the first time
1. Remove any packaging.
2. Clean the appliance to remove any residues (see 'Cleaning and maintenance').
3. Put the plug in the wall socket and let the barbecue heat up for 5 minutes. This way you remove any
packaging odor from the device.
ATTENTION:
• When the barbecue is first switched on, the grill may emit a new smell. A small amount of smoke may
also be noticeable.This is normal and will stop on it's own. Make sure the appliance has sufficient
ventilation.
OPERATION - Smokeless grilling
The barbecue grill is designed to use with water for smokeless and delicious grilling.
1. Take out the heating element.
2. Fill the base with water between the 'MIN'- and 'MAX'-indication. The water in the base will evaporate,
therefore it is necessary to refill the tray from time to time. Do not allow the water level to go below the
'MIN'-indication.
3. Place back the control panel with heating element.
3. Place back the heating element.
4. Place the food stuffs to be grilled directly onto the grill rack. Do not use any dishes or aluminium foil.
5. Turn the on/off switch to activate the appliance.
6. The grilling times vary according to the nature of the food and to your personal taste.
7. When grilling has finished, turn the appliance off and disconnect the grill form the mains supply
socket.
ATTENTION:
• Be careful not to pour water on the heating element.
A
25
EN
3