Forch 5436 3 Manual De Instrucciones página 10

Creeper
ENG
Creeper with 6 castors
1. For Your Safety
Please read this operating instructions before using this piece of equipment!
For effective use of the product as intended, it is essential that all safety and other information in these
operating instructions is adhered to. FÖRCH will not be liable for any injuries to persons or damage to property
originating from improper application, misuse of the piece of equipment or a disregard of the safety instructions.
They are the sole responsibility of the owner.
2. Explanation of Symbols
ATTENTION : Please pay attention to these symbols!
CAUTION! This symbol marks important specifi cations, dangerous conditions,safety risks
and safety advice.
ATTENTION! This symbol marks advice which if disregarded results in damage, malfunction
and/or functional failure of the product.
3. Spare Parts
• For safety reasons, only the manufacturer's original spare parts may be used.
• Unsuitable or defective spare parts may cause damage, malfunction or total failure of the product.
• The use of non approved spare parts will void all warranty, service and liability claims as well as all claims for
compensation against the manufacturer or its agents, distributors and sales representatives.
4. Disposal
• Dispose of in compliance with guidelines for environmental protection and work safety.
• Components can be recycled.
• Metal rests can be scrapped.
5. Appropriate Use
Sit down gently. Avoid shock loads caused by jumping or falling onto the seat.
• Do not stand on the seat.
• Move over smooth, seamless surfaces only.
• Do not exceed rated capacity.
6. Storage
The piece of equipment should be stored as indicated below:
• Do not store outdoors.
• Store in a dry and dust-free place.
• Do not expose to liquids or aggressive substances.
• Storage temperature: -10° up to +45°C
• Relative air humidity: 65% max.