Setting The Resolution - Denver DCA-5100 Manual Del Usuario

This DV (camera) has built-in internal memory. This memory can be extended with a SD memory card
(not included).
Follow the instructions given below to insert the optional SD memory card into the camera.
1. Turn off the camera first.
2. Insert the SD card into the camera.
Note: There is only one right direction to insert the SD memory card into the slot. Do not force the card
into the slot, or else it may damage both the camera and the SD memory card.
Note: The SD memory card must be formatted before taking photographs. See the following sections
for more information.
5.3 Formatting the memory or SD card
1. Press and hold Mode button to enter setting menu;
2. Select Setup setting by Right key and select Format mode by up or down key;
3. Press REC to confirm and select by up or down key.
4. Press REC to format the card or memory.

5.4 Setting the resolution

The DV (camera) can be set to different resolutions.
1. Press and hold Mode button to set proper resolution.
Resolution: VGA（640 x 480），1.3M（1280 x 960），2.0M（1600 x 1200），
3.1M (2048 x 1536), 5M (2560 x 1920), 8M (3264 x 2448), 12M (4032 x 3024)
2. Different resolutions will be displayed. Select the desired resolution by using the ▲ or
and then press the REC button to confirm the selection.
5.5 Taking Video or photographs
1. Turn on the DV（camera）.
2. Press Mode to set the DV to photo mode (
3. Depending on the distance to the object being photographed, use Macro switch to adjust the
distance. Select the flower symbol (
If you wish to take video or photograph of surroundings or people (0.5m – infinity),set the Macro
switch to Normal mode (
4. Use the LCD screen to aim the object you wish to take video or photograph.
5. Press REC button.
All manuals and user guides at all-guides.com
) or video mode (
) if you wish to take a close-up photograph (11cm –18cm).
).
7
▼
).
buttons